Holes for rigging

Home Forums Restoring Fireflies Holes for rigging

This topic contains 1 reply, has 1 voice, and was last updated by  Fiasco2168 2 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #64692

    Fiasco2168
    Participant

    Hi
    I’ve been restoring my old wooden Firefly ‘Fiasco’ and have finally got the decks on but don’t know where the holes need to go for the rigging to go through the side decks.
    I’ve done a bit of a conversion job on her by adding a waterproof bow compartment and a rear bulkhead and deck, again with waterproof access.
    Should the rigging just pin onto the side plates or do I use some sort of tensioning screws?

    Thanks
    Simon

    • This topic was modified 2 months, 3 weeks ago by  Fiasco2168.
    Attachments:
    You must be logged in to view attached files.
    #64693

    Fiasco2168
    Participant

    This is how badly rotten she was at the start of the long process!
    I’ve had to replace large sections of hull!!

    • This reply was modified 2 months, 3 weeks ago by  Fiasco2168.
    Attachments:
    You must be logged in to view attached files.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.